Hyundai Equus Manuals

Hyundai Azera: Front Seat Frame Assembly Repair procedures - Front Seat - Body (Interior and Exterior) - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Front Seat Frame Assembly Repair procedures

Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Frame Assembly Repair procedures

Replacement
   
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
•
Put on gloves to protect your hands.
1.
Remove the front seat back cover.
(Refer to Front Seat - "Front Seat Back Cover")
2.
Remove the front seat cushion cover.
(Refer to Front Seat - "Front Seat Cushion Cover")
3.
After loosening the mounting screws, then remove the front seat back frame cover (A).

4.
After loosening the mounting bolts, then disconnect the front seat back frame assembly (A) and front seat cushion frame assembly (B).
Tightening torque :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

5.
Installation is the reverse of removal.
   
•
Remove the side air bag for replacing side air bag installation seat.
•
Before service, be fully aware of precautions and service procedure relevant to air bag.
Front Seat Frame Assembly Components and Components Location
Component Location 1. Front seat back frame assembly2. Front seat cushion frame assembly ...

Rear Seat
...

See also:

Temperature Control Actuator Components and Components Location
Component Location ...

Horn
To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed. Check the horn regularly to be sur ...

Water Temperature Control Assembly Components and Components Location
Components 1. Water temperature control assembly2. Throttle body water hose3. Gasket ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com