Replacement |
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
[LH]
[RH]
|
3. |
Installation is the reverse of removal. |
Trunk Lid Latch Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...
Rear Door Module Components and Components Location
Component Location
1. Rear door module
...
Fuel Pressure Control Valve (FPCV) Troubleshooting
Signal Waveform
...