Hyundai Azera: Horn

Repair procedures

Inspection (With GDS) 1. Check BCM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. 2. If diagnosis is ...

Components and Components Location

Component Location 1. Horn switch2. Horn relay (Engine room compartment)3. Horn - High pitch4. Horn - Low pitch5. Clock spring ...

See also:

Front Driveshaft Repair procedures
Replacement 1. Loosen the wheel lug nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque: 88. ...

Seat Belt Buckle Switch (BS) Description and Operation
Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status inp ...

Water Pipe Repair procedures
Removal and Installation 1. Remove the delivery pipe and injector assembly. (Refer to Fuel System - "Delivery Pipe") 2. Remove the water temperature control assembly. (Refer to Cooling Sys ...