Hyundai Azera: Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
| Specifications |
Direct control VFS[T/CON]
? Control type : Normal low type
| Control Pressure [kpa (kgf/cm?, psi)] | 9.81~ 500.14 (0.1~ 5.1, 1.42 ~ 72.54) |
| Current value(mA) | 50 ~ 850 |
| Internal resistance(?) | 5.1 |
Torque Converter Control Solenoid Valve (T/CON_VFS) Description and Operation
Description
Torque converter control solenoid valve (T/CON) is attached
to the valve body. This variable force solenoid valve directly controls
the hydraulic pressure inside the torque converte ...
Torque Converter Control Solenoid Valve (T/CON_VFS) Schematic Diagrams
Circuit Diagram
...
See also:
Blower Motor Repair procedures
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor voltage is not operated well, substitute with a known-good blower motor and check for prop ...
Steering Angle Sensor Description and Operation
Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor
Driven Power Steering) and it sends messages to HECU through CAN
communication line.
The SAS is used to determine turnin ...
SS-A Solenoid Valve(ON/OFF) Description and Operation
Description
SS-A solenoid valve is attached to the valve body and is an
on/off solenoid valve that is used to change gears. SS-A Solenoid
valve(ON/OFF) is installed at valve body. ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com