Alternator Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the engine cover.
3.
Disconnect the alternator connector (A) and the cable (B) from the 'B' terminal.
4 ...
Injector Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the injector connector.
3.
Measure resistance between the injector terminals 1 and 2.
4.
Check that the resistance is within t ...
Push-starting
Vehicles equipped with automatic transaxle cannot be push-started. Follow the
directions in this section for jump-starting.
WARNING - Tow starting vehicle
Never tow a vehicle to start it beca ...