Inspection |
1. |
Disconnect the connectors for each motor.
A : Front height motor
B : Slide motor
C : Rear height motor
D : Recline motor
E : Lumbar support motor
F : Cushion extension motor |
2. |
With the battery connected directly to the motor terminals, check if the motors run smoothly. |
3. |
Reverse the connections and check that the motor turns in reverse. |
4. |
If there is an abnormality, replace the motors. |
Rear Door Trim Components and Components Location
Component Location
1. Rear door trim
...
Catalytic Converter Description and Operation
Description
The catalytic converter of the gasoline engine is a three way
catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and
separates oxygen from the oxides of nitrogen (NOx). ...
Accelerator Pedal Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the accelerator position sensor connector (A).
3.
Remove the installation nuts (B) and ...