Hyundai Azera: Door Lamp Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the front door trim panel.
|
| 3. |
Remove the connector(A) and door LED mood lamp(B).
|
| 4. |
Remove the rear door trim panel.
|
| 5. |
Remove the connector and door LED mood lamp(A).
|
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the front door trim panel.
|
| 3. |
Remove the rear door trim panel.
|
| 4. |
Replace the door lamp bulb with turning the socket counterclockwise.
[Front Door]
[Rear Door]
|
| Installation |
| Mood Lamp |
| 1. |
Install the door mood lamp and connector. |
| 2. |
Install the door trim. |
| 3. |
Connect the negative (-) battery terminal. |
| Door Lamp |
| 1. |
Install the door lamp and connector. |
| 2. |
Install the door trim. |
| 3. |
Connect the negative (-) battery terminal. |
Overhead Console Lamp Repair procedures
License Lamp Repair proceduresICM (Integrated Circuit Module) Relay Box Components and Components Location
Component
Input/Output Specification
No.ConnectorNo.Connector1 -11 -2 -12 -3Burglar horn13 -4 -14 -5Engine room box(Horn 15A fuse)15GND6IPM(BCM : Burglar alarm h ...
Rear Door Curtain Assembly Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
After loosening the mounting screws, then remove the rear door curtain (A).
3.
Installation is the re ...
Drive Belt Tensioner Repair procedures
Removal and Installation
1.
Remove the drive belt idler.
(Refer to Timing System - "Idler")
2.
Remove the drive belt auto tensioner (A).
Tightening torque
Bolt (B) :
81.4 ~ 85.3N.m (8.3 ...