Hyundai Azera: License Lamp Repair procedures
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body Electrical System / Lighting System / License Lamp Repair procedures
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body Electrical System / Lighting System / License Lamp Repair procedures
| Removal |
| 1. |
Disconnect the negative(-) battery terminal. |
| 2. |
Remove the license lamp (A) with loosening a screw.
|
| Installation |
| 1. |
Install the bulb. |
| 2. |
Install the license lamp lens. |
Door Lamp Repair procedures
Removal
Mood lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
(Refer to Body - "Front Door Trim")
3.
Remove the connector(A) and door LED mood l ...
Hazard Lamp Switch Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the center console upper assembly (A) with hazard lamp switch.
Apply the protective tapes to the center ...
See also:
Seat Belt Pretensioner (BPT) Components and Components Location
Components
...
Rail Pressure Sensor (RPS) Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe
and measures the instantaneous fuel pressure in the delivery pipe. The
sensing element (Semiconductor element) built in ...
Instrument Cluster Components and Components Location
Components
Input/Output Specification
...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com