To reduce the probability of fogging up the inside of the windshield, the air
intake or air conditioning are controlled automatically according to certain conditions
such as or
position. To cancel or return the
defogging logic, do the following.
1. Turn the ignition switch to the ON position.
2. Press the defrost button ( ).
3. While holding the air conditioning button (A/C) pressed, press the air intake
control button at least 5 times within 3 seconds.
The indicator on the air intake control button blinks 3 times with 0.5 second of interval. It indicates that the defogging logic is canceled or returned to the programmed status.
If the battery has been discharged or disconnected, it resets to the defog logic status.
If engine turns over normally but does not start
1. Check fuel level.
2. With the ignition switch in the OFF position, check all connectors at the ignition
coils and spark plugs. Reconnect any that may be disconnected or loose.
3. Check the fuel ...
Shift Cable Repair procedures
Removal
1.
Remove the center console assembly.
(Refer to Body - "Console")
2.
Remove the duct (A).
3.
Remove the control cable (B).
4.
Remove the control cable assembly in the vehicle ...
Front Door Window Glass Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Remove the front door window glass mounting hole plug (B).
•
Use the door swi ...