After selecting the channel Press
and hold the desired preset ~
key.
A 'beep' will sound and the channel is saved to the selected preset button.
Barometric Pressure Sensor (BPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the BPS at idle and IG ON.
Specification: Refer to "Specification"
Removal
1.
Turn ...
Crankshaft Damper Pulley Components and Components Location
Components
1. Crankshaft damper pulley
...
Searching Categories
Select the category by using the
, keys and press the
key to select.
Channels for the selected category are played. ...