Hyundai Azera: Engine Mounting Components and Components Location

Engine Room Under Cover Repair procedures

Removal and Installation 1. Remove the engine room under cover (A) and (B). Tightening torque: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)     • When removing the ...

Engine Mounting Repair procedures

Removal and Installation [Engine mounting support bracket] 1. Install the jack to the edge of upper oil pan (A) to support the engine.     Insert the rubber block between jac ...

See also:

Output Speed Sensor Troubleshooting
Signal Waveform Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...

Windshield Deicer Repair procedures
Inspection 1. Remove the cowl top cover. (Refer to Windshield Wiper/Washer - "Front Wiper Motor") 2. Disconnect the windshield deicer connector from the wiper motor linkage. 3. Check for ...

Front Door Module Repair procedures
Replacement 1. Remove the front door window glass. (Refer to Front Door - "Front Door Window Glass") 2. Remove the front door outside handle. (Refer to Front Door - "Front Door Outside Handl ...