Hyundai Equus Manuals

Hyundai Azera: Heater Hose Repair procedures - Cooling System - Engine Mechanical System - Hyundai Azera 2011-2025 Service ManualHyundai Azera: Heater Hose Repair procedures

Removal and Installation
1.
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner")
2.
Drain the coolant.
(Refer to Cooling System - "Coolant")
3.
Remove the heater hoses (A).

   
When installing the heater hoses, install as shown in illustrations.

4.
Installation is reverse order of removal
Heater Hose Components and Components Location
Components 1. Heater hose (Inlet)2. Heater hose (Outlet)3. Clamp ...

Radiator Hose Components and Components Location
Components 1. Radiator upper hose2. Radiator lower hose3. Hose clip4. Clamp ...

See also:

Photo Sensor Description and Operation
Description 1. The photo sensor is located at the center of defrost nozzle. 2. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its lig ...

Evaporator Temperature Sensor Repair procedures
Inspection 1. Ignition "OFF". 2. Disconnect evaporator temperature sensor. 3. Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor. Spe ...

Smart key receiver Specifications
Specification RF Receiver ItemsSpecificationFrequency433.92 MHzAntenna typeFSK (Frequency Shift Keying) ...

Categories

Hyundai Azera Manuals


© 2011-2025 Copyright www.hgmanual.com