Hyundai Azera: Intake Manifold Components and Components Location

Surge Tank Repair procedures

Removal and Installation 1. Drain the coolant. (Refer to Cooling System - "Coolant") 2. Remove the air cleaner assembly. (Refer to Intake And Exhaust System - "Air Cleaner") 3. Disconn ...

Intake Manifold Repair procedures

Removal and Installation 1. Remove the surge tank. (Refer to Intake And Exhaust System - "Surge Tank") 2. Remove the low pressure fuel line. (Refer to Fuel System - "Fuel Line") 3. Rem ...

See also:

Barometric Pressure Sensor (BPS) Description and Operation
Description Barometric Pressure Sensor (BPS) is a speed-density type sensor and is installed on the air cleaner assemby. It senses absolute pressure of the air cleaner assemby and transfers the ...

Brake fluid
Check brake fluid level in the brake fluid reservoir. The level should be between “MIN� and “MAX� marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 3 or DO ...

Repair procedures
Replacement [Removal]     • Put on gloves to protect your hands. • Use seat covers to avoid damaging any surfaces. 1. Remove the front pillar trim. (Refer to ...