Removal and Installation |
1. |
Disconnect the battery negative terminal.
(Refer to Engine Electrical System - "Battery") |
2. |
Remove the main muffler (A).
|
3. |
Install in the reverse order of removal. |
Relay Box (Passenger Compartment) Components and Components Location
Components
...
Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
ConditionOutput Voltage (V)Idle Approx. 1.21, ...
Front Impact Sensor (FIS) Components and Components Location
Components
...