Hyundai Azera: ICM (Integrated Circuit Module) Relay Box Description and Operation

ICM (Integrated Circuit Module) Relay Box Schematic Diagrams

Circuit Diagram ...

ICM (Integrated Circuit Module) Relay Box Repair procedures

Inspection Two Turn Unlock Relay Check for continuity between the terminals. 1. There should be continuity between the No.18 and No.17 terminals when power and ground are connected to the No. ...

See also:

Fuel Pressure Control Valve (FPCV) Description and Operation
Description Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on var ...

Front Impact Sensor (FIS) Description and Operation
Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...

Checking the brake fluid level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX (Maximum) and MIN (Minimum) marks on the side of the reservoir. Before removing the reservoir cap and addin ...