Hyundai Azera: 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation
| Description |
26 brake control solenoid valve(26/B) is attached to the
valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the 26 brake.
Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Specifications
Direct control VFS[26/B]
? Control type : Normal low type
Control Pressure [kpa (kgf/cm?, psi)] 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54)Current value(mA)50~850 Internal resi ...
See also:
Yaw-rate and G Sensor Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console.
(Refer the Body - "Floor console")
3.
Disconnect the yaw rate & latera ...
Winter driving
Severe weather conditions in the winter result in greater wear and other problems.
To minimize the risks of winter driving, you should follow these suggestions: ...
Passive Occupant Detection System (PODS-F) Repair procedures
Removal
PODS-F ECU
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front passenger seat assembly.
(Refer to Body - "Front s ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com