Hyundai Azera: 26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications
| Specifications |
Direct control VFS[26/B]
? Control type : Normal low type
| Control Pressure [kpa (kgf/cm?, psi)] | 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) |
| Current value(mA) | 50~850 |
| Internal resistance(?) | 5.1 |
26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation
Description
26 brake control solenoid valve(26/B) is attached to the
valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the 26 brake. ...
26 Brake Control Solenoid Valve(26/B_VFS) Schematic Diagrams
Circuit Diagram
...
See also:
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil
to ...
Barometric Pressure Sensor (BPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the BPS at idle and IG ON.
Specification: Refer to "Specification"
Removal
1.
Turn ...
Changing the coolant
Have the coolant changed by an authorized HYUNDAI dealer according to the Maintenance
Schedule at the beginning of this section.
Put a thick cloth around the radiator cap before refilling the coolan ...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com