Hyundai Azera: Spark Plug Repair procedures

Fifth generation HG (2011â€“2026) / Hyundai Azera 2011-2026 Service Manual / Engine Electrical System / Ignition System / Spark Plug Repair procedures

Removal and Installation

1.	Remove the ignition coils. (Refer to Ignition System - "Ignition Coil")

2.

Using a spark plug socket, remove the spark plug.

Tightening torque :

14.7 ~ 24.5N.m (1.5 ~ 2.5kgf.m, 10.8 ~ 18.1lb-ft)

Be careful that no contaminates enter through the spark plug holes.

3.	Installation is reverse order of removal.

Inspection

1.

Inspect the electrodes (A) and ceramic insulator (B).

Inspection Of Electrodes

Condition

Dark deposits

White deposits

Description

-	Fuel mixture too rich

-	Low air intake

-	Fuel mixture too lean

-	Advanced ignition timing

-	Insufficient plug tightening torque

2.

Check the electrode gap (A).

Standard :

1.0 ~ 1.1 mm (0.0394 ~ 0.0433 in.)

Spark Plug Components and Components Location

Components 1. Spark plug ...

Charging System

...

See also:

Special Service Tools
Special Service Tools Tools(Number and name)IllustrationUse09200-38001, 09200-3N000Engine support fixture (Beam)Removal and installation of the transaxle.Except lower supporter, use beam only w ...

Barometric Pressure Sensor (BPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the BPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn ...

Description and Operation
Description The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil fi ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com