Trouble Symptom Charts |
Trouble Symptom 1 |
Trouble symptom | Probable cause | Remedy |
The set vehicle speed varies greatly upward or downward "Surging" (repeated alternating acceleration and deceleration) occurs after setting | Malfunction of the vehicle speed sensor circuit | Repair the vehicle speed sensor system, or replace the part |
Malfunction of ECM | Check input and output signals at ECM |
Trouble symptom | Probable cause | Remedy |
The CC system is not canceled when the brake pedal is depressed | Damaged or disconnected wiring of the brake pedal switch | Repair the harness or replace the brake pedal switch |
Malfunction of the ECM signals | Check input and output signals at ECM |
Trouble symptom | Probable cause | Remedy |
The CC system is not canceled when the shift lever is moved to
the "N" position (It is canceled, however, when the brake pedal is
depressed) | Damaged or disconnected wiring of inhibitor switch input circuit | Repair the harness or repair or replace the inhibitor switch |
Improper adjustment of inhibitor switch |
Malfunction of the ECM signals | Check input and output signals at ECM |
Trouble symptom | Probable cause | Remedy |
Cannot decelerate (coast) by using the "SET/–" switch | Temporary damaged or disconnected wiring of "SET/–" switch input circuit | Repair the harness or replace the "SET/–" switch |
Malfunction of the ECM signals | Check input and output signals at ECM |
Trouble symptom | Probable cause | Remedy |
Cannot accelerate or resume speed by using the "RES/+" switch | Damaged or disconnected wiring, or short circuit, or "RES/+" switch input circuit | Repair the harness or replace the "RES/+" switch |
Malfunction of the ECM signals | Check input and output signals at ECM |
Trouble symptom | Probable cause | Remedy |
CC system can be set while driving at a vehicle speed of less
than 40km/h (25mph), or there is no automatic cancellation at that speed | Malfunction of the vehicle-speed sensor circuit | Repair the vehicle speed sensor system, or replace the part |
Malfunction of the ECM signals | Check input and output signals at ECM |
Trouble symptom | Probable cause | Remedy |
The cruise main switch indicator lamp does not illuminate (But CC system is normal) | Damaged or disconnected bulb of cruise main switch indicator lamp | Repair the harness or replace the part. |
Harness damaged or disconnected |
Fluid Components and Components Location
Components Location
1. Injection hole(eyebolt)2. Oil level plug3. Oil drain plug
...
Engine Oil Repair procedures
Replacement
•
Prolonged and repeated contact with mineral oil will result
in the removal of natural fats from the skin, leading to dryness,
irritation and dermatitis. I ...
Shift Cable Components and Components Location
Components
1. Shift lever knob2. Shift lever assembly 3. Control cable assembly4. Manual control lever (T/M side)
...