Removal and Installation |
1. |
Disconnect the negative battery cable. |
2. |
Disconnect the driver air bag module.
|
3. |
Remove the steering wheel.
|
4. |
Loosen the screws and then remove the cover (A). |
5. |
Disconnect the steering wheel remote control switch connectors (A). |
6. |
Loosen the screw and then remove the steering wheel remote control switch assembly (A), being cautious of fixed clip. |
7. |
Remove the smart cruise control switch (A). |
8. |
Installation is reverse order of removal. |
Compressor Repair procedures
Removal
1.
If the compressor is marginally operable, run the engine at
idle speed, and let the air conditioning work for a few minutes, then
shut the engine off.
2.
Disconnect the negati ...
Fuel Pressure Control Valve (FPCV) Troubleshooting
Signal Waveform
...
Radiator Repair procedures
Removal and Installation
1.
Remove the radiator upper hose and lower hose.
(Refer to Cooling System - "Radiator Hose")
2.
Remove the cooling fan assembly.
(Refer to Cooling System - "Cooli ...