The valve body is essential to automatic transaxle control
and consists of various valves used to control the oil feed from the oil
pump. Specifically, these valves consist of pressure regulator valves,
oil redirection valves, shift valves, and manual valves. The body also
features electronic solenoid valves that ensure smooth gear changes.

Service Adjustment Procedure
Oil level Check
A check of Automatic Transaxle Fluid(ATF) level is not
normally required during scheduled services. If an oil leak is found, ...
Components Location
1. PCV adjust screw2. Solenoid valve3. Oil temperature sensor4. Accumulator5. Low & reverse brake(LR/B) pressure flow hole6. Under drive brake (UD/B) pressure flow hole
...
See also:
Body Control Module (BCM) Specifications
Specifications
ItemsSpecificationsRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-22°F~167°F(-30°C~ 75°C)Dark current5.5mA (SMK : 4.0mA)
...
Fuel filler lid
...
Brake Switch Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the lower crash pad.
(Refer to the Body - "Crash Pad")
3.
Disconnect the stop lamp switch con ...