Hyundai Azera: Front Impact Sensor (FIS) Description and Operation
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and Operation
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and Operation
| Description |
The front impact sensor (FIS) is installed in the Front End
Module (FEM). They are remote sensors that detect acceleration due to a
collision at its mounting location. The primary purpose of the Front
Impact Sensor (FIS) is to provide an indication of a collision. The
Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
SRS Control Module (SRSCM) Repair procedures
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console.
(Ref ...
Front Impact Sensor (FIS) Components and Components Location
Components
...
See also:
Components and Components Location
Component Location
1. Panoramaroof2. Panoramaroof switch3. Panoramaroof motor & controller4. Roller blind motor & slave controller
...
Description and Operation
Description
•
EPS (Electric power steering, Column assist type) system uses
an electric motor to assist the steering force and it is an engine
operation independent steering system.
• ...
Battery Repair procedures
Removal and Installation
1.
Remove the air duct (B).
2.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft)
3.
D ...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com