Hyundai Azera: Side Impact Sensor (SIS) Description and Operation
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Description and Operation
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Description and Operation
| Description |
Side Impact Sensor (SIS) system consists of two Pressure Side
Impact Sensor (P-SIS) which are installed at each center of the front
door module (LH and RH) and two SIS which are installed at each center
pillar nearby (LH and RH) and two rear SIS which are installed in the
rear pillar (LH and RH).
Pressure Side Impact Sensor is also called P-SIS because it detects pressure due to collision at its mounting location.
Side Impact Sensor is also called A-SIS because it detects acceleration.
SRSCM decides deployment of the airbag and the time of
deployment through the collision signal of the SIS when the collision
occurred.
Front Impact Sensor (FIS) Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front impact sensor connec ...
Side Impact Sensor (SIS) Components and Components Location
Components
...
See also:
Water Pipe Repair procedures
Removal and Installation
1.
Remove the delivery pipe and injector assembly.
(Refer to Fuel System - "Delivery Pipe")
2.
Remove the water temperature control assembly.
(Refer to Cooling Sys ...
Evaporator Temperature Sensor Repair procedures
Inspection
1.
Ignition "OFF".
2.
Disconnect evaporator temperature sensor.
3.
Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor.
Spe ...
Shift Cable Components and Components Location
Components
1. Shift lever knob2. Shift lever assembly 3. Control cable assembly4. Manual control lever (T/M side)
...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com