Description |
Never attempt to measure the circuit resistance of the Seat
Belt Pretensioner (BPT) even if you are using the specified tester. If
the circuit resistance is measured with a tester, the pretensioner will
be ignited accidentally. This will result in serious personal injury. |
Crankshaft Position Sensor (CKPS) Repair procedures
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification: Refer to “Wave Form”
Removal
1.
Turn the ignition switch OFF and disconnect the battery negat ...
Automatic transaxle operation
The automatic transaxle has 6 forward speeds and one reverse speed. The individual
speeds are selected automatically, depending on the position of the shift lever.
✽ NOTICE - If the battery h ...
Vanity mirror lamp
Opening the lid of the vanity mirror will automatically turn on the mirror light.
CAUTION
To prevent unnecessary charging system drain, close the vanity mirror cover
after using the mirror. ...