Hyundai Equus Manuals

Hyundai Azera: Inhibitor Switch Troubleshooting - Automatic Transaxle Control System - Automatic Transaxle System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Inhibitor Switch Troubleshooting

Fault Diagnosis
Fault Diagnosis for Symptom
Major Symptom
Expected Cause
Items to Check and Measures
Shift lever not operating
Gear not marked on cluster
Shock occurs while shifting lever Warning lamp ON
Engine OFF while vehicle is parked
Inhibitor switch circuit abnormal
Inhibitor switch function abnormal
Check the inspection FLOW and replace the inhibitor switch
Inhibitor switch "N" setting faulty
Adjust "N" setting using "N" setting jig (refer to automatic transmission system - "inhibitor switch")
Shift cable separation faulty
Adjust shift cable separation (refer to automatic transmission system - "inhibitor switch")
Poor ground condition on reversing light circuit
Check the ground condition on reversing light and retighten it
Inhibitor switch vehicle side circuit abnormal
Check the connection of junction box power terminal, fuse (TCU2) terminal and replace the junction box or adjust the gap
Check inside the inhibitor switch connector for foreign substance and whether terminal is bent
Poor ground condition on inhibitor switch wire
Check the ground condition of wire and retighten it
Poor inhibitor unit (disconnection/short-circuit)
Replace inhibitor switch (refer to inhibitor switch inspection)

Inhibitor Switch Schematic Diagrams
Circuit Diagram ...

Inhibitor Switch Repair procedures
Inspection     • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Inspection flow Items to chec ...

See also:

Trunk Lid Latch Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Put ...

Start/Stop Button Components and Components Location
Component ...

Anchor Pretensioner (APT) Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. To remove the seat belt anchor pretensioner (C), keep on pushing the lock pi ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com