Hyundai Equus Manuals

Hyundai Azera: Oil Level Gauge & Pipe Repair procedures - Lubrication System - Engine Mechanical System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Oil Level Gauge & Pipe Repair procedures

Removal and Installation
1.
Remove the oil level gauge (A).

Tightening torque:
18.6 ~ 22.6N.m (1.9 ~ 2.3kgf.m, 13.7 ~ 16.6lb-ft)

   
When installing, apply engine oil to the O-ring and take care the O-ring not to be damaged.
Always use a new O-ring.
2.
Installation is in the reverse order of removal.
Oil Level Gauge & Pipe Components and Components Location
Components 1. Oil level gauge2. Oil level gauge pipe3. O-ring ...

Intake And Exhaust System
...

See also:

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Oil Filter Repair procedures
Replacement 1. Remove the engine cover. 2. Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter. 3. Replace the oil filter. (1) Disconnect the ...

Description and Operation
Description The 6-speed automatic transaxle consists of an overdrive clutch (OD/C), a one-way clutch (OWC), a lower and reverse brake (LR/B), an underdrive brake (UD/B), a 26 brake (26/B), and ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com