Hyundai Equus Manuals

Hyundai Azera: Radiator Hose Repair procedures - Cooling System - Engine Mechanical System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Radiator Hose Repair procedures

Removal and Installation
1.
Remove the battery and tray.
2.
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner")
3.
Drain the coolant.
(Refer to Cooling System - "Coolant")
4.
Loosen the upper hose clip fixing bolt (A), and then remove the radiator upper hose (B) and lower hose (C).

Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

   
When installing radiator hoses, install as shown in illustrations.

5.
Installation is reverse order of removal
Radiator Hose Components and Components Location
Components 1. Radiator upper hose2. Radiator lower hose3. Hose clip4. Clamp ...

Cooling Fan Components and Components Location
Components 1. Cooling fan2. Fan motor3. Fan shroud ...

See also:

General Information
General Troubleshooting Information Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check the battery for damage, state of charge, and clean and tight c ...

Engine Coolant Temperature Sensor (ECTS) Schematic Diagrams
Circuit Diagram ...

On-board Refueling Vapor Recovery (ORVR) valve Repair procedures
Removal 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel tank. (Refer to Fuel System - "Fuel Tank") 3. Disconnect the vapor hose (A). 4. Remove ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com