Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the passenger compartment juction box cover. |
3. |
Remove the crash pad side switch assembly (A) by pushing it through juction box cover hole.
|
4. |
Side crash pad switch connector
|
5. |
Operate the rheostat switch and check for continuity between terminals. |
Transaxle Control Module (TCM) Repair procedures
Inspection
Transaxle Control Module(TCM) Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector a ...
Radial-ply tires
Radial-ply tires provide improved tread life, road hazard resistance and smoother
high speed ride. The radial- ply tires used on this vehicle are of belted construction,
and are selected to compleme ...
ETC (Electronic Throttle Control) System Specifications
Specification
[Throttle Position Sensor (TPS)]
Throttle angle(°)Output Voltage (V)TPS1TPS200.54.5100.964.05201.413.59301.873.14402.322.68502.782.23603.231.77703.691.32804.140.86904.60.41984.650.35 ...