Opening the hood
Open the hood after turning off the engine on a flat surface, move the shift
lever to the P(Park) position and set the parking brake.
1. Pull the release lever to unlatch the hood. The hood shou ...
General Information
General
1.
Basically, all measurements in this manual are taken with a tracking gauge.
2.
When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
3.
...
Trailing Arm Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
•
Be careful not to damage to the hub bolts ...