Hyundai Equus Manuals

Hyundai Azera: Alternator Repair procedures - Charging System - Engine Electrical System - Hyundai Azera 2011-2025 Service ManualHyundai Azera: Alternator Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Engine Electrical System / Charging System / Alternator Repair procedures

Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the engine cover.
3.
Disconnect the alternator connector (A) and the cable (B) from the 'B' terminal.

4.
Remove the drive belt.
5.
Remove the alternator (A).
Tightening torque :
26.5 ~ 33.3 N.m (2.7 ~ 3.4 kgf.m, 19.5 ~ 24.6 lb-ft)

6.
Installation is reverse order of removal.
   
Do not disassemble the Lambda 3.3L engine alternator. The alternator inner parts will not be supplied. A faulty occurs, inspect charging system first. If necessary, replace the alternator assembly.
Repair procedures
On-vehicle Inspection     • Check that the battery cables are connected to the correct terminals. • Disconnect the battery cables when the battery is given a quick ch ...

Battery Description and Operation
Description 1. The maintenance-free battery is, as the name implies, totally maintenance free and has no removable battery cell caps. 2. Water never needs to be added to the maintenance-free b ...

See also:

Input Speed Sensor Troubleshooting
Signal Waveform Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...

Front Impact Sensor (FIS) Description and Operation
Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...

Oil Level Gauge & Pipe Repair procedures
Removal and Installation 1. Remove the oil level gauge (A). Tightening torque: 18.6 ~ 22.6N.m (1.9 ~ 2.3kgf.m, 13.7 ~ 16.6lb-ft)     When installing, apply engine oil to t ...

Categories

Hyundai Azera Manuals

© 2011-2025 Copyright www.hgmanual.com