Components |
Barometric Pressure Sensor (BPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the BPS at idle and IG ON.
Specification: Refer to "Specification"
Removal
1.
Turn ...
Voice Command List
• Common Commands: These commands can be used in most operations. (However a
few commands may not be available during certain operations)
FM/AM radio commands: available during FM, ...
Troubleshooting
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "IPM".
3.
To consult the present input/output value of IPM ...