Hyundai Azera: Brake system
Good driving practices
Power brakesRear Oil Seal Repair procedures
Removal
1.
Remove the drive plate.
(Refer to Cylinder Block - "Drive Plate")
2.
Remove the rear oil seal (A).
Installation
1.
Using SST(09231-3C200, 09231-H1100), install the rear oil s ...
Main Muffler Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
(Refer to Engine Electrical System - "Battery")
2.
Remove the main muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m ( ...
SS-B Solenoid Valve(ON/OFF) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valver connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...