Function |
Audio Bluetooth System |
• |
This audio system supports Bluetooth® hands-free and stereo-headset features. |
- |
HANDS-FREE feature : Making or receiving calls wirelessly. |
- |
STEREO-HEADSET feature : Playing music from cellular phones (that supports A2DP feature) wirelessly. |
|
1. |
Push the "SETUP" button to enter SETUP mode. |
2. |
Select “PHONE” item by using ![]() ![]() |
3. |
Select desired item by using ![]() ![]() |
• |
Pairing a phone
Before using Bluetooth® features, the phone must be paired
(registered) with the audio system. Up to 5 phones can be paired with
the system.
|
1. |
Press "SETUP" button to enter SETUP mode. |
2. |
Select “Phone”, then “Pair” in PHONE menu. |
3. |
The audio displays “searching ---- passkey : 0000” |
4. |
Search the Bluetooth® system on your phone. Your phone
should display your [vehicle model name] on the Bluetooth® device
list.Then attempt pairing on your phone.
|
• |
Connecting a phone
When the Bluetooth® system is enabled, the phone previously
used is automatically selected and re-connected. If you want to select
different phone previously paired, the phone can be selected through
“Select Phone” menu.
Only a selected phone can be used with the hands-free system at a time. |
1. |
Press "SETUP" button to enter SETUP mode. |
2. |
Select “Phone”, then “Select” in PHONE menu. |
3. |
Select desired phone name from the list shown. |
• |
Deleting a Phone
The paired phone can be deleted. |
- |
When the phone is deleted, all the information associated with that phone is also deleted (including phonebook). |
- |
If you want to use the deleted phone with the audio system again, pairing procedure must be completed once more. |
1. |
Press "SETUP" button to enter SETUP mode. |
2. |
Select “Phone”, then “Delete” in PHONE menu. |
3. |
Select desired phone name from the list shown. |
• |
Changing Priority
If several phones are paired with the audio system, the
system attempts to connect following order when the Bluetooth® system
is enabled:
1) “Priority” checked phone.
2) Previously connected phone
3) Gives up auto connection. |
1. |
Press "SETUP" button to enter SETUP mode. |
2. |
Select “Phone”, then “Priority” in PHONE menu. |
3. |
Select desired phone name from the list shown. |
• |
Turning Bluetooth® ON/OFF
Bluetooth® system can be enabled (ON) or disabled (OFF) by this menu. |
- |
If Bluetooth® is disabled, all the commands related to
Bluetooth® system prompts whether you wish to turn Bluetooth® ON or
not. |
1. |
Press "SETUP" button to enter SETUP mode. |
2. |
Select “Phone”, then “BT Off” in PHONE menu. |
Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
ConditionOutput Voltage (V)Idle Approx. 1.21, ...
Front Door Latch Repair procedures
Replacement
1.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
2.
Disconnect the connector (A) and front door latch wiring harness.
3.
Remove the front door latc ...
Defroster
CAUTION - Conductors
To prevent damage to the conductors bonded to the inside surface of the rear
window, never use sharp instruments or window cleaners containing abrasives to clean
the window.
& ...