Hyundai Azera: Driveshaft Assembly

Front Hub - Axle Repair procedures

Replacement 1. Loosen the wheel lug nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire(A) from front hub. Tightening torque: 88.2 ...

Front Driveshaft Components and Components Location

Component Location 1. Driveshaft(LH)2. Inner shaft bearing bracket assembly3. Driveshaft(RH) Components 1. BJ Assembly2. Clip3. BJ Boot Band4. BJ Boot5. Dynamic Damper Band6. Dynamic Damp ...

See also:

Oil Pressure Switch Repair procedures
Removal and Installation 1. Remove the water pipe. (Refer to Cooling System - "Water Pipe") 2. Remove the oil pressure switch (A). Tightening torque: 34.3 ~ 44.1N.m (3.5 ~ 4.5kgf.m, 25.3 ...

ESC Control Module Repair procedures
Removal 1. Turn the ignition switch OFF. 2. Remove the air duct (B) and air cleaner assembly (A). 3. Remove the connector and then arrange the wiring harness (A). 4. Remove the brake f ...

Description and Operation
Description of ESC Optimum driving safety now has a name : ESC, the Electronic Stability Control. ESC recognizes critical driving conditions, such as panic reactions in dangerous situations, a ...