Replacement |
1. |
Detach the clips, then remove the front door side weatherstrip (A). |
2. |
Installation is the reverse of removal.
|
Keep paint and trim in good condition
Scratches or chips in the finish should be covered with "touch-up" paint as soon
as possible to reduce the possibility of corrosion. If bare metal is showing through,
the attention of a qu ...
Camshaft Repair procedures
Removal
[RH]
1.
Remove the RH bank timing chain.
(Refer to Timing System - "Timing Chain")
2.
Remove the RH exhaust CVVT oil control valve.
(Refer to Fuel System - "CVVT Oil Control Valv ...
Rear Cross Member Repair procedures
Replacement
1.
Remove the rear wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
•
Be careful not to damage to the hub bo ...