Hyundai Azera: General Information

Brake System

...

Specifications

Specifications ItemSpecificationMaster cylinder • Type • I.D. mm(in) • Piston stroke mm(in) • Fluid level switch ?Fixed type 23.81 mm (0.937 in)45 ± 1 mm (1.7 ...

See also:

Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between the VIS valve terminals 1 and 2. 4. Check that the resistance is within ...

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to ...

Oil Level Gauge & Pipe Repair procedures
Removal and Installation 1. Remove the oil level gauge (A). Tightening torque: 18.6 ~ 22.6N.m (1.9 ~ 2.3kgf.m, 13.7 ~ 16.6lb-ft)     When installing, apply engine oil to t ...