Hyundai Azera: Under Body Body Repair
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Body (Interior and Exterior) / Body Dimensions / Under Body Body Repair
| Projected Dimensions |
|
|
|
| Front side member tooling hole (O25) | Side cover mounting hole (O9) | Side cover mounting hole (O9) |
|
|
|
| Front subframe mounting bolt | Front subframe mounting hole (O18) | Front subframe mounting hole (O12) |
|
|
|
| Front side member tooling hole (O14.5) | Center floor side member extension tooling hole (O19.5) | Rear floor side member tooling hole (O8) |
|
|
|
| Rear trailing arm mounting hole (O18) | Rear subframe mounting hole (O17) | Rear subframe mounting hole (O16) |
|
|
|
| Fuel filler-neck bracket mounting hole (O8) | Fuel filler-neck bracket mounting hole (O8) | Rear floor side member tooling hole (O10) |
| ||
| Rear floor side member tooling hole (O20) |
| Actual Measurement Dimensions |
|
|
|
| Front side member tooling hole (O25) | Side cover mounting hole (O9) | Side cover mounting hole (O9) |
|
|
|
| Front subframe mounting bolt | Front subframe mounting hole (O18) | Front subframe mounting hole (O12) |
|
|
|
| Front side member tooling hole (O14.5) | Center floor side member extension tooling hole (O19.5) | Rear floor side member tooling hole (O8) |
|
|
|
| Rear trailing arm mounting hole (O18) | Rear subframe mounting hole (O17) | Rear subframe mounting hole (O16) |
|
|
|
| Fuel filler-neck bracket mounting hole (O8) | Fuel filler-neck bracket mounting hole (O8) | Rear floor side member tooling hole (O10) |
| ||
| Rear floor side member tooling hole (O20) |
Rear Body Body Repair
Roof panel rear cornerSide outer panel rear cornerRear package tray trim mounting hole (O12) Side outer panel rear cornerRear combination lamp mounting hole(8.5X8.5) Rear bumper mounting hole (14X ...
Fender
...
See also:
Temperature Control Actuator Repair procedures
Inspection
1.
Ignition "OFF"
2.
Disconnect the connector of temperature control actuator.
3.
Verify that the temperature control actuator operates to the
hot position when connecting 12 ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Checking tire inflation pressure
Check your tires once a month or more.
Also, check the tire pressure of the spare tire.
How to check
Use a good quality gage to check tire pressure.You can not tell if your tires
are properly infl ...
Categories
Hyundai Azera Manuals
