Hyundai Azera: Front Door Trim Repair procedures
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Trim Repair procedures
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Trim Repair procedures
| Replacement |
|
| 1. |
Using a screwdriver or remover, remove the front frame inner cover (A).
|
| 2. |
Remove the front door inside handle cap (B), front door cap (C), front door cover (D). |
| 3. |
After loosening the mounting screws, then remove the front door trim (A).
|
| 4. |
Remove the front door inside handle cage (A).
|
| 5. |
Disconnect the connector (A).
|
| 6. |
Installation is the reverse of removal.
|
Front Door Trim Components and Components Location
Component Location
1. Front door trim
...
Front Door Inside Handle Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
After loosening the mounting screws, then remove the front door inside handle (A).
3.
Installation ...
See also:
Drive Belt Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
2.
To release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A).
3.
Installa ...
Compressor Oil Repair procedures
Oil Specification
1.
The HFC-134a system requires synthetic (PAG) compressor oil
whereas the R-12 system requires mineral compressor oil. The two oils
must never be mixed.
2.
Compressor (P ...
Brake Line Repair procedures
Removal
1.
Disconnect the brake fiuid level switch connector, and remove the reservoir cap.
2.
Remove the brake fluid from the master cylinder reservior with a syringe.
...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com