Hyundai Azera: Front Door Latch Components and Components Location

Front Door Outside Handle Repair procedures

Replacement 1. Remove the hole plug (B). 2. After loosening the mounting bolt, then remove the front door outside handle cover (A). Tightening torque : 0.7 ~ 0.5 N.m (0.07 ~ 0.1 kgf.m, 1.0 ...

Front Door Latch Repair procedures

Replacement 1. Remove the front door module. (Refer to Front Door - "Front Door Module") 2. Disconnect the connector (A) and front door latch wiring harness. 3. Remove the front door latc ...

See also:

ICM (Integrated Circuit Module) Relay Box Repair procedures
Inspection Two Turn Unlock Relay Check for continuity between the terminals. 1. There should be continuity between the No.18 and No.17 terminals when power and ground are connected to the No. ...

Alignment Repair procedures
Front Wheel Alignment     When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always position the vehicle on a lev ...

Door Lamp Repair procedures
Removal Mood lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. (Refer to Body - "Front Door Trim") 3. Remove the connector(A) and door LED mood l ...