Hyundai Equus Manuals

Hyundai Azera: Rear Pillar Trim Repair procedures - Interior Trim - Body (Interior and Exterior) - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Rear Pillar Trim Repair procedures

Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Pillar Trim Repair procedures

Replacement
   
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
•
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, remove the rear pillar trim (A).

2.
Installation is the reverse of removal.
   
•
Replace any damaged clips.
Rear Pillar Trim Components and Components Location
Component Location 1. Rear pillar trim ...

Rear Package Tray Trim Components and Components Location
Component Location 1. Rear package tray trim ...

See also:

Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ECTS connector. 3. Remove the ECTS (Refer to "Removal"). 4. After immersing the thermistor of the sensor into engine coola ...

Multimedia system
...

Cylinder Head Cover Repair procedures
Removal [LH] 1. Remove the Intake manifold. (Refer to Intake And Exhaust System - "Intake Manifold") 2. Remove the high pressure fuel pump. (Refer to Fuel System - "High Pressure Fuel Pu ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com