Hyundai Azera: Windshield Deicer Repair procedures
| Inspection |
| 1. |
Remove the cowl top cover.
(Refer to Windshield Wiper/Washer - "Front Wiper Motor") |
| 2. |
Disconnect the windshield deicer connector from the wiper motor linkage.
|
| 3. |
Check for continuity between the terminals of deicer lines.
|
| 4. |
Turn the ignition switch ON and the windshield deicer switch
ON, then measure the voltage between the terminals of harness side
deicer connector.
|
Description and Operation
Windshield Deicer Switch Repair proceduresAnchor Pretensioner (APT) Description and Operation
Description
Front seat belt anchor pretensioner operates as well as belt
pretensioner at the same time If it gets into its deploy condition after
a collision. It is located at near anchor on fr ...
Checking the brake fluid level
Check the fluid level in the reservoir periodically. The fluid level should be
between MAX (Maximum) and MIN (Minimum) marks on the side of the reservoir.
Before removing the reservoir cap and addin ...
Hood Latch Release Handle Components and Components Location
Component Location
1. Hood latch release handle
...