Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
|
3. |
Disconnect the 6P connector (B) of the coil antenna and then remove the coil antenna (A) after loosening the screw. |
Installation |
1. |
Install the coil antenna and connect the 6P connector. |
2. |
Install the crash pad lower panel. |
ESC Control Module Repair procedures
Removal
1.
Turn the ignition switch OFF.
2.
Remove the air duct (B) and air cleaner assembly (A).
3.
Remove the connector and then arrange the wiring harness (A).
4.
Remove the brake f ...
Transaxle Control Module (TCM) Repair procedures
Inspection
Transaxle Control Module(TCM) Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector a ...
Power brakes
Your vehicle has power-assisted brakes that adjust automatically through normal
usage.
In the event that the power-assisted brakes lose power because of a stalled engine
or some other reason, you c ...