Hyundai Azera: Button Engine Start System

Antenna Coil Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Disconnect the 6P connector (B) of the coil ante ...

Components and Components Location

Component Location 1. Start Stop Button(SSB)2. FOB key3. Smart key unit4. RF receiver5. Interior antenna 16. Interior antenna 2 7. Trunk antenna8. Door handle & ...

See also:

Surge Tank Repair procedures
Removal and Installation 1. Drain the coolant. (Refer to Cooling System - "Coolant") 2. Remove the air cleaner assembly. (Refer to Intake And Exhaust System - "Air Cleaner") 3. Disconn ...

Input Speed Sensor Specifications
Specifications ? Type: Hall effect sensor Operation condition [°C(°F)](-40~150) -40~302Air gap(mm)in.(0.95~1.65)0.037~0.065Output voltage(V)High1.18~1.68Low0.59~0.84 ...

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and ...