Hyundai Equus Manuals

Hyundai Azera: ESCL(Electronic Steering Column Lock) Repair procedures - Button Engine Start System - Body Electrical System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: ESCL(Electronic Steering Column Lock) Repair procedures

Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the crash pad lower panel.
3.
Remove the steering column upper and lower shrouds.
4.
Disconnect the electronic steering column lock connector (A).

5.
Remove the electronic steering column lock after removing the shear bolts.
   
Using a suitable tool, cut slots into the heads of the shear bolts.
Wear safety glasses to protect your eyes from flying bits of metal.
Wear work gloves to protect your hands from any sharp metal edges on the shear bolt.
Installation
1.
Install the electronic steering column lock (A).
   
Do not reuse the shear bolts.
When installing the new shear bolts to the electronic steering column lock, tighten the shear bolts until its head is cut off.

Tightening torque :
7 ~ 13 N.m (0.7 ~ 1.3 kgf.m, 5 ~ 9.4 lb.ft)

2.
Install the steering column.
3.
Install the crash pad lower panel.
ESCL(Electronic Steering Column Lock) Components and Components Location
Component ...

Front / Rear Parking Assist System
...

See also:

Filler-Neck Assembly Repair procedures
Removal 1. Lift the vehicle. 2. Disconnect the fuel filler hose (A). 3. Disconnect the ventilation hose (B) from the fuel tank air filter. 4. Open the fuel filler door and then remove ...

Door Lamp Repair procedures
Removal Mood lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. (Refer to Body - "Front Door Trim") 3. Remove the connector(A) and door LED mood l ...

Rear Glass Defogger Printed Heater Repair procedures
Inspection     Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply finger pressure on the tin foil, moving the tin foil along th ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com