Hyundai Azera: Specifications
| Specifications |
| Item | Specification | |
| Front/Rear parking assist system control unit | Rated voltage | DC 12V |
| Operation range | 30~120 cm(11.8~47.2 in) | |
| Operation voltage | DC 9V~16V | |
| Operation current | Max. 300 mA | |
| Operation temperature | -30~+80 °C | |
| Operation frequency | 48 ± 5 KHz | |
| Number of sensors | Front : 4EA(Left, Right, Center left, Center right) Rear : 4EA(Left, Right, Center left, Center right) | |
Components and Components Location
Component Location
...
See also:
Accelerator Position Sensor (APS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specification: Refer t ...
Crankshaft Position Sensor (CKPS) Repair procedures
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification: Refer to “Wave Form”
Removal
1.
Turn the ignition switch OFF and disconnect the battery negat ...
Inhibitor Switch Description and Operation
Description
Inhibitor Switch monitors the lever's position(PRND) and is used to control gear setting signals. ...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com