Replacement |
1. |
Discharge refrigerant from refrigeration system. |
2. |
Replace faulty tube or hose.
|
3. |
Tighten joint of bolt or nut to specified torque.
|
4. |
Evacuate air in refrigeration system and charge system with refrigerant.
|
5. |
Inspect for leakage of refrigerant.
Using a gas leak detector, check for leakage of refrigerant. |
6. |
Inspect A/C operation. |
Door Scuff Trim Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
Injector Drive Box (IDB) Repair procedures
Removal
1.
Turn the ignition switch off and disconnect the battery negative (-) cable.
2.
Disconnect the injector drive box (IDB) connector (A).
3.
Remove the air cleaner assembly.
(Refer ...
Rear Door Outside Handle Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the hole plug (B).
3.
After loosening the mounting bolt, then remove the rear door outside hand ...