Hyundai Azera: Mode Control Actuator Components and Components Location

Temperature Control Actuator Repair procedures

Inspection 1. Ignition "OFF" 2. Disconnect the connector of temperature control actuator. 3. Verify that the temperature control actuator operates to the hot position when connecting 12 ...

Mode Control Actuator Description and Operation

Description The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select ...

See also:

26 Brake Control Solenoid Valve(26/B_VFS) Schematic Diagrams
Circuit Diagram ...

TJ Joint Repair procedures
Replacement     • Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease. • The boot band should be replaced with a ne ...

Rear Glass Defogger Switch Repair procedures
Inspection 1. The rear glass defogger switch inputs can be checked using the GDS. 2. To check the input value of rear glass defogger switch, select option "IPM". 3. To consult the present ...