Component Location |
Components |
1. Duct Seal 2. Duct Case 3. Inlet Door 4. Intake Actuator | 5. Inlet Duct Case (A) 6. Climate control air filter 7. Cluster Ionizer 8. Climate control air filter Cover | 9. Blower Upper Case 10. Blower Lower Case 11. FET 12. Blower Motor |
A/C Pressure Transducer Repair procedures
Inspection
1.
Measure the pressure of high pressure line by measuring voltage output between NO.1 and NO.2 terminals.
2.
Inspect the voltage value whether it is sufficient to be regular value ...
Reservoir Tank Components and Components Location
Components
1. Reservoir tank2. Over flow hose
...
Checking the brake fluid level
Check the fluid level in the reservoir periodically. The fluid level should be
between MAX (Maximum) and MIN (Minimum) marks on the side of the reservoir.
Before removing the reservoir cap and addin ...