Side Impact Sensor (SIS) Repair procedures
Removal
Front Side Impact Sensor
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Remove the door scuff trim.
(Refer to Body - "Door sc ...
Spark plugs
Make sure to install new spark plugs of the correct heat range. ...
If engine turns over normally but does not start
1. Check fuel level.
2. With the ignition switch in the OFF position, check all connectors at the ignition
coils and spark plugs. Reconnect any that may be disconnected or loose.
3. Check the fuel ...