To keep the locks from freezing, squirt an approved de-icer fluid or glycerine into the key opening. If a lock is covered with ice, squirt it with an approved de-icing fluid to remove the ice. If the lock is frozen internally, you may be able to thaw it out by using a heated key. Handle the heated key with care to avoid injury.
Start/Stop Button Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the AVN head unit.
(Refer to AVN System - "AVN Head Unit")
3.
Disconnect the start/stop button connector. Push the hook ...
ICM (Integrated Circuit Module) Relay Box Description and Operation
Description
The ICM relay is united with rear fog lamp relay, ECS relay,
burglar horn relay and ESS relay which installed inside the passenger
crash pad. ...
Refrigerant label (If equipped)
The refrigerant label is located on the underside of the hood.
The label contains the following information:
Type of refrigerant
Amount of refrigerant
...